:: Back To Formworks   

Wall spacer made from rigid PVC Tube with extra wide contact surface to formwork with an inner diameter of 22m/m and chamfered end pieces. The assembly consists of  the Tube, two end pieces with wide double rims and a serrated labyrinth seal and three plugs for installation after dismantling of the formwork.

After installation of the plugs, the chamfered ends are grouted. The material is non-biodegradable.

These products have been tested in Iran by SANO engineering laboratory and in Austria and conform to DIN 1048 for water pressure up to 0.5 N/mm2 and suitability for installation in sewage plants.

 

 

 
Code Reference

For Inside Tube Diameter

 
Mb 125 water stoper 22/26 mm
 

 

Code Reference

For Inside Tube Diameter

 
Ws 126

water stoper in PVC Tube

22 mm
Ws 178

water stoper in PVC Tube

25 mm
   
   
   
 

 

 
 
  Spacers
      Chair Spacer with clip
      Chair Spacer without clip
      Double Rebar chair Spacer
      Special Chair Spacer
      Mesh Spacer
      PVC Pipe Spacer
      Mesh Cap Spacer
      Circular Spacer
      Pile Cage Spacer
      Rock Bolt Spacer
  Formworks
      Cones
      Sleeve & Cones
      Sealing Middle Bolt
      Sealant Foam Tape
      Chamfer
  Other Products
      Water Stop

 

      Switch Box

 

      Insert

 

     
    Powered By :

 

| Home | Products | Projects | Certificates | Order Now | Enquiry | Site Map | Contact Us | About Us |

2003-2006. All Rights reserved with Pozzolan Construction Industries

Designed By Ali Esfandiari